Film Mask: File Print - AgfaPhoto d-lab.2 8060/260 Operation Manual

Settings and Configurations

4.8.3.3 Film Mask: File Print

022_dpkp
4-122 2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
If the screen Combiprint order
configuration was called up with New:
press Config. type and select Combiprint.
The Film type file print is fixed and cannot
be changed.
Press PpF (number of prints per frame) and
enter the desired value:
preset value = 1 (range 0 to 999).
Sub-configurations Indexprint, Backprint,
Correction, Autosave, Front print: press
the button and select the respective sub-
configuration from the list or set to Off.
Press Combiprint and select the desired
configuration.
Activate one of the following options (the
options exclude each other; if one option is
activated, the previously active option
automatically becomes inactive):
Fit image to paper
(presetting) The complete digital image
is printed; if the image has another
aspect ratio than the paper, a white
border remains on two sides.
Fill print size
A center cropping of the digital image is
printed without a border; part of the
original image is lost if the digital
image has another aspect ratio than the
paper.
Press Adjust: Shorter side or
Adjust: Longer side
The original image remains the same,
the cut length is variable. One side of
the digital image is adjusted to the
paper width: either shorter side or
longer side.
Press Save or Save as and enter the name.
AgfaPhoto