Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
If paper cutting is confirmed, the machine cuts the paper tip and transport this piece of
paper through the complete paper drive and places it in the sorter.
6.2.2
Changing the Mirror Box
Applies only to d-lab.2/2plus
For films of type 120 a different mirror box than for all the other film formats must be
inserted.
If necessary, change the mirror box as follows:
1
G_GG212_4 (Fig. shows d-lab.2)
AgfaPhoto
In order to avoid paper transport problems
due to an incorrectly cut paper tip, we
recommend to press yes the following
cases:
when a new paper roll was inserted;
–
when a paper jam occurred.
–
Use both hands to hold the mirror box (1) on
both sides and pull it out towards the front.
Place the other mirror box on the guide rails
and push it in towards the lamphouse until it
locks in.
2005-05-01 / PN 04092_01
Production
6
6-31
Advertisement
Table of Contents
