Exclusion Of Liability; Appropriate Use; Inappropriate Use - AgfaPhoto d-lab.2 8060/260 Operation Manual

Introduction

1.3.3.3 Exclusion of Liability

AgfaPhoto tested the contents of this Operation Manual regarding the correspondence
with the described hardware and software. However, deviations cannot be excluded
completely and AgfaPhoto will not accept a guarantee for complete correspondence. The
information in this Operation Manual is checked and revised in regular intervals and the
required corrections will be included in the following editions.
We reserve the right to technical changes.
1.3.4

Appropriate Use

Applies to d-lab.2/2plus
The d-lab.2/2plus is a digital minilab
to print negative films, slides, and images from digital sources on photographic paper,
–
and
to save digital data on digital storage media.
–
Applies to netlab.2plus
The netlab.2plus is a digital minilab
to print images from digital sources on photographic paper, and
–
to save digital data on digital storage media.
–
The Minilab must only be used for purposes described in these instructions and in
combination with the components and consumables recommended and/or admitted by
AgfaPhoto. Further use outside these specifications is considered as inappropriate use.
AgfaPhoto will not be liable for any damage resulting from inappropriate use.
The appropriate use also includes:
the observance of all notes in the Installation and Operation Instructions;
–
the performance of inspection and maintenance routines.
–
The equipment must only be operated by qualified professional staff. Qualified personnel
in accordance with this Operation Manual are persons specially trained by AgfaPhoto for
the operation of the equipment.
1.3.5

Inappropriate Use

Inappropriate use (misuse) will be:
any application not corresponding to the afore mentioned appropriate use or use
–
outside the specifications;
the nonobservance of the instructions in the Operation Manual;
–
the nonobservance of the safety rules;
–
if problems which may affect the safety are not immediately solved before normal
–
operation is resumed (operation of the machine in a condition, which is not correct
regarding functional and safety aspects);
any unauthorized changes on the equipment.
–
1-8 2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
AgfaPhoto