Table of Contents
Advertisement
General Description, Work Routines and Operation
2.6.6
Reorder Keyboard
Applies only to d-lab.2/2plus
011
Reorder lists can be entered via the image of a reorder keyboard on the touchscreen (see
Working in Reorder Print Mode
explained in the following table.
Keys
Functions
YMCD
Color / density corrections: Yellow, Magenta, Cyan, Density
ACT, DCT, SHP
Corrections: Area contrast (ACT), Detail contrast (DCT), Sharpness (SHP)
SAT ,
Correction: Saturation (SAT)
Comma to separate the frame numbers
0 to 9
Entry of numbers
-
For the input of negative corrections: Minus
For the input of frame numbers: Hyphen
A, X
Letters for DX code
Column-wise navigation in the reorder list
In reorder list: line-wise navigation
After pressing a line in the configuration column: scrolling through the list of configurations
OK
Completing an input in a reorder list
Pulldown menu during configuration: accept selection and close the pulldown menu
DEL
Deletes one position in the frame number field, e.g. 1A-3A, 13A
Deletes the complete number in the PpF field (prints per frame)
Inactive in the configuration field and in the correction field. Wrong entries in the correction
field are corrected by reentry; if no correction is desired, 0 must be typed in.
2-36
2005-05-01 / PN 04092_01
in Chapter 6). The function of the individual keys is
d-lab.2, d-lab.2plus, netlab.2plus: Operation
AgfaPhoto
Advertisement
Table of Contents
