Table of Contents
Advertisement
Production
1
21 mm
2
4
3
APS_cart
6.1.8
End of Order (Automatic / Manual)
The orders are completed by end of order. After an end of order the sorter switches to the
next bucket, so the prints are sorted in separate buckets according to the orders.
Special cases:
The sorter switches to the next bucket without order end if an order exceeds the
–
capacity of one bucket (max. 40 prints).
Splices in the paper rolls are cut separately and the respective pieces of paper are
–
deposited in the print order stack.
If after an end of order a negative or slide is scanned (only d-lab.2/2plus), or an image file
is loaded, this starts a new order. This new order automatically gets a new order number.
Automatic end of order is activated:
Applies to d-lab.2/2plus
In Autoprint mode: if a film (strip), which exceeds a certain adjustable length, leaves
–
the film drive (see
In Reorder, File print and Network order mode if all images of the order have been
–
processed.
Upon changing to another print mode.
–
When the film carrier is changed.
–
When the film stop key (STOP key) on the machine is pressed.
–
When the Stop button on the screen is pressed (attention, the order is not complete if
–
the last print has not yet left the Printer section)..
Applies to netlab.2plus
In File print and Network order mode if all images of the order have been processed.
–
Upon changing to another print mode.
–
When the Stop button on the screen is pressed (Attention! This order is incomplete if
–
the last picture has not yet left the Printer section).
6-20
2005-05-01 / PN 04092_01
Other Settings < Film Length
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Film status indication:
unexposed
partly exposed
fully exposed but not developed
developed film
IPI: Irreversible Process Indicator
(pushed in for developed film)
APS films are inserted in a separate unit in the
film feeder.
Insert the APS film in this feeder unit.
in Chapter 4).
AgfaPhoto
Advertisement
Table of Contents
