d-lab.2, d-lab.2plus, netlab.2plus: Operation
5.1
Overview
m3
Tests are used to calibrate the machine. Perform test regularly before and during
production to ensure a uniform high quality of the production.
Paper Balance Test (PBL)
–
when creating a new paper configuration
–
when changing an existing paper configuration (e.g. changing paper type)
–
when inserting a paper with a new emulsion number
–
See
Printer tests: Paper Balance Test (PBL) and Master Balance Test (MBL)
chapter.
Master Balance Test (MBL)
–
to compensate for system fluctuations (in chemicals, Printer, etc.) and to balance their
influence on all paper configurations (see
and Master Balance Test (MBL)
Minor system fluctuations can quickly be compensated for by the fast MBL test
Printing an MBL Test
(FastMBL) (see
– Applies only to d-lab.2/2plus
Scanner calibration (pixel correction, PIKO); see
PIKO)
in this chapter.
Control strips to check the chemicals of the Paper Processor (Paper Processor test);
–
see
Checking the Paper Process (Paper Processor test)
All the above tests can be called up via the main menu Test.
AgfaPhoto
Printer Tests: Paper Balance Test (PBL)
in this chapter.
in this chapter).
Calibrate Scanner (pixel correction,
in this chapter.
in this
2005-05-01 / PN 04092_01
Tests
5
5-1