Paper Jam In The Transfer Positions Transport Unit (Tu) And Print Engine (Pe) - AgfaPhoto d-lab.2 8060/260 Operation Manual

Troubleshooting
7.7.4

Paper Jam in the Transfer Positions Transport Unit (TU) and Print Engine (PE)

Applies to d-lab.2
1
2
dlab2005
dlabr095
7-20 2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Pull out the print engine (do not pull out the
transport unit!):
Open the Printer side door.
Open the locking: two levers (1).
Pull out the print engine (2) completely.
Do not pull out the transport unit!
The paper is in the print engine:
Remove the top (1) and/or bottom (2) guide
plates by pressing the toggle of the guide
plate down (1) or up (2).
Remove the paper.
Put the guides back in initial position.
The paper is in the transport unit:
Leave the transport unit in the Printer; do
not pull it out.
Remove the paper.
Push in the print engine to stop position.
Lock the levers of the print engine: two
levers.
Close the Printer side door.
AgfaPhoto