Settings and Configurations
4.7
Defining and Editing Print Configurations
The print configuration offers various settings which are required for a certain print
product.
004
For this purpose the following configurations are defined:
Order
–
(single, package, combi-print, reproduction)
Paper (width, surface)
–
Back print
–
Index print (all prints of an order as thumbnails on one sheet of paper)
–
Correction (color, contrast, sharpness, density)
–
Autosave (automatic saving of the image files of an order on a storage medium)
–
Front print (texts on the front of the print)
–
Combiprint (one picture several times on one sheet of paper, in the same size or
–
different sizes)
Configurations of the Order type (hereinafter called order configuration;
Defining and Editing Order Configurations
see
configuration types 2 to 8. Therefore these configurations are referred to as sub-
configurations, they must be set up first.
A sub-configuration can be used in any number of order configurations.
Configuration names may have 30 characters maximum, and may include the following
special characters:
- . : , ; + ! ? = ( ) _ / & % $ and blanks.
4-84
2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
in this chapter) are combinations of the
AgfaPhoto