Table of Contents
Advertisement
Troubleshooting
7.5
The Machine Fails to React to Operator Inputs
If the machine no longer reacts to operator inputs, a reset must be made:
via the Stop button on the touch screen.
–
Faster than a reset via the ON button: the laser must not be restarted, there is no new
pixel correction (PIKO) required (see
or
via the On key on the machine (see
–
chapter).
A reset via the ON key is a system reset with restart of all Printer programs.
7-4
2005-05-01 / PN 04092_01
Reset with the Stop Button
Resetting the Machine with the ON key
d-lab.2, d-lab.2plus, netlab.2plus: Operation
in this chapter).
in this
AgfaPhoto
Advertisement
Table of Contents
