Maintenance
8.3
Daily Maintenance
8.3.1
Cleaning the APS Film Carrier
Applies only to d-lab.2/2plus
Purpose:
Correct reading of magnetic data.
Clean the magnetic head every day so that possible deposits cannot dry and make the
cleaning more difficult.
Material:
cleaning strips and cleaning fluid
3 cleaning strips (order no. CM+9.8506.1330.1)
–
Complete set:
–
3 cleaning strips
+100 ml Isopropanol bottle (empty)
(order no. CM+9.8506.1320.1)
First filling by the service in the country
–
Refilling by the customer (without service).
–
CAUTION!
Clean the APS film carrier only with Isopropanol! Other cleaning agents will
damage the transport rollers TR4 / TR5 (rubber) and in addition they dissolve the
bonding of the cleaning strips. Dissolved glue will dirty the magnetic head
irreversibly.
CAUTION!
Isopropyl alcohol is a flammable liquid which may cause irritation of eyes and dry
skin. After maintenance wash your hands with water.
Isopropanol can damage the lacquer of the machine. Remove any splashes
immediately.
8-8
2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
AgfaPhoto