Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Troubleshooting
7.6.5
Paper Processor and Printer Errors
Some errors cause the Printer to stop. If paper is still in the transport area of the Printer, it
must be removed before the work can be continued.
If an error occurs during a reset, a message appears indicating unsolved errors. These
active errors must be cleared from the error list. Deactivate the option Show all errors in
the Error list screen to display only active errors (see
Display Error List
in Chapter 2).
If an error occurs during a reset (after the Stop button was pressed or the ON key), or if
the error was not cleared by the reset, a message indicates the presence of unsolved
errors. These active errors must be repaired and cleared in the error list. Deactivate the
option Show all errors in the Error list screen to display only active errors.
7
AgfaPhoto
2005-05-01 / PN 04092_01
7-11
Advertisement
Table of Contents
