d-lab.2, d-lab.2plus, netlab.2plus: Operation
7.7.10 Paper jam between dryer and paper outlet
Applies to d-lab.2
If a paper jam occurs between dryer and paper outlet, there is a risk that large format
prints damage the foam rollers of the dryer.
To prevent this proceed as follows:
G_PP108
AgfaPhoto
2
1
Remove the dryer cover. Use a coin to turn
the lock by 90º.
Loosen the locking screw (knurled screw 1)
of the dryer rack. Pull out the rack on the
telescopic rails by approx. 10 mm.
Turn the hand wheel (2) counter-clockwise,
to ensure that the paper is transported into
the dryer rack.
Once the paper is completely inside the
dryer rack, the rack can be pulled out.
2005-05-01 / PN 04092_01
Troubleshooting
7
7-27