Table of Contents
Advertisement
Maintenance
8.4.5.3 Print Machine (PM)
Applies to d-lab.2plus and netlab.2plus
Special tools
– Vacuum cleaner
– Brush
1
2
dlab2005
G_PM715
8-24
2005-05-01 / PN 04092_01
1
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Open the Printer side door.
Open the lock (1) of the Print Machine.
Pull out the Print Machine on the telescopic
rails (2).
Remove the guide plate (1) upwards:
For this purpose press the rocker of guide
plate (1) down, remove the part to the right;
unlock the bottom flap (2) (press the holding
bracket to the right) and fold the part down).
Remove the paper dust with a vacuum
cleaner.
Insert the upper guide (1) again,
press the bottom flap (2) back up and
engage the holding bracket.
AgfaPhoto
Advertisement
Table of Contents
