Table of Contents
Advertisement
General Description, Work Routines and Operation
Splices in paper rolls
Note
For technical reasons some of the paper rolls come with splices. In compliance with
ISO 1009 the maximum number of splices in a roll length of
79 / 91,5 m:
1 splice
–
158 / 183 m:
2 splices
–
This information applies to Sensatis (Splendix) paper. The relations for other papers are
similar. Only lengths used in the d-lab family are listed here.
To compensate for the paper loss due to splices 30 cm of paper are added per splice. In
AGFACOLOR paper rolls the splices are marked with oblong holes which initiates the
required blank paper transports in the Printer.
2.3.7
Densitometer
1
G_GG116 (Fig. shows d-lab.2plus)
The densitometer (1), installed above the dryer, is used for automatic machine and paper
calibration. For this purpose it measures the MBL and PBL tests printed in the machine
Tests
(see
, Chapter 5).
2-14
2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
AgfaPhoto
Advertisement
Table of Contents
