Paper Jam In The Transfer Positions Between Feeder Unit Fu And Print Machine Pm - AgfaPhoto d-lab.2 8060/260 Operation Manual

d-lab.2, d-lab.2plus, netlab.2plus: Operation
7.8.4

Paper Jam in the Transfer Positions between Feeder Unit FU and Print Machine PM

Applies to d-lab.2plus/netlab.2plus
1
2
dlab2005
G_PM715
AgfaPhoto
Do not pull out the feeder unit FU!
Paper jammed in PM:
1
Paper jammed in FU:
2005-05-01 / PN 04092_01
Pull out the print machine PM (do not pull
out the feeder unit!):
Open the Printer side door.
Open the locking: two levers (1).
Pull out the print machine PM
completely (2).
Remove the upper guide plate (1): for this
purpose press the rocker of the guide plate
down (1).
Unlock the lower guide plate and fold it
down.
Remove the paper.
Put the guides back in initial position.
Leave the FU in the Printer; do not pull it
out.
Remove the paper.
Push in the print machine PM completely.
Close the lock of the print machine PM: two
levers.
Close the Printer side door.
Troubleshooting
7
7-35