Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
1.3.3
Warranty
1.3.3.1 Liability of the Owner
Warranty and availability clauses are subject to the following conditions:
The Minilab is only operated by persons who participated in the detailed AgfaPhoto
–
training and are able to proof this.
The required power supply for the operation of the Minilab, as well as chemicals and
–
other consumables must be provided according to the instructions.
All instructions regarding the operation and maintenance of the Minilab as given by
–
AgfaPhoto must be followed.
Maintenance of the machine must be performed in compliance with the instructions
–
given by AgfaPhoto.
The use of other wear and tear parts or spare parts than the original parts by AgfaPhoto
–
results in immediate termination of warranty, availability and guaranty claims.
1.3.3.2 Warranty and Liability
The equipment has been built and tested in compliance with the standards and rules as
Applied Standards and Rules
listed in the section
working condition. To keep this condition and guarantee an operation without any risks,
the user must observe the notes and warnings in this Operation Manual. Owner and user
will be liable and must ensure that all safety features and devices, as well as the
conditions in the machine environment are provided and followed in a suitable measure.
The general terms and conditions of sales and delivery of the AgfaPhoto GmbH apply as a
matter of principle. The owner receives these terms at the time of contract conclusion or
before.
Warranty and liability claims in case of personal injuries and property damage are
excluded if they are the result of one or more of the following causes:
improper use of the Minilab;
–
incorrect assembly, operation, handling or maintenance of the Minilab;
–
non-observance of notes in the Operation Manual with respect to transport, storage,
–
assembly, switch-on, operation, and maintenance of the equipment;
high-handed changes on the Minilab;
–
inadequate monitoring of assemblies of the
–
Minilab, which are subject to wear and tear;
incorrectly made repairs;
–
catastrophic cases that are due to external impacts and force majeure.
–
A correct and safe operation of the equipment also requires correct transport, correct
storage, correct installation and assembly, as well as careful operation and service.
Guaranty regulations are up to the countries. For information refer to the sales contract or
the warranty certificate.
AgfaPhoto
, and left the factory in perfect and safe
2005-05-01 / PN 04092_01
Introduction
1
1-7
Advertisement
Table of Contents
