General Description, Work Routines and Operation
2.8.6
Displaying the Error List
All messages displayed in the information field are saved in the error list.
062
Troubleshooting
Refer to Chapter 7
2-50
2005-05-01 / PN 04092_01
for the repair of errors.
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Press in this order:
i
Error list
The Error list screen opens.
If the error list should only display the errors,
which occurred after the last start or reset:
Deactivate Show all errors.
If a message in the error list is not shown
completely:
Touch the message.
The complete text appears in the field below
the error list.
Deactivate Show all errors.
If a message should be removed from the list:
Select the message and press Remove
selection.
Press Back to exit the screen.
AgfaPhoto