Production
6.1.2.2 Printing without or with Preview
In case of printing without preview, the negatives (only d-lab.2/2plus) or image files are
printed without further actions be the operator. It is not possible to switch to Autoprint
with preview while an order is running.
Printing without preview:
– Applies only to d-lab.2/2plus
can be selected in the print modes Autoprint, Reorder
can be selected in the print mode File print
–
always active in the print mode Network order
–
During printing with preview numerous functions for image corrections and image
enhancement are offered. They have than an additional effect on the preset corrections
(see
Production Balance
Dotted lines in the preview images indicate that the image format does not correspond to
the selected paper size. The print only shows the image area between the lines.
The edited images can be saved on storage media.
It is not possible to switch to a print mode without preview while an order is running.
Printing with preview:
– Only applies to d-lab.2/2plus
Can be selected in the modes Autoprint, Reorder
Can be selected in the mode File print
–
– Only applies to d-lab.2/2plus
Always in the modes Manual positioning, Slide print and Slide film (option)
6-4
2005-05-01 / PN 04092_01
in Chapter 4).
d-lab.2, d-lab.2plus, netlab.2plus: Operation
AgfaPhoto