Replacing The Chemical Filters - AgfaPhoto d-lab.2 8060/260 Operation Manual

Table of Contents

d-lab.2, d-lab.2plus, netlab.2plus: Operation

Replacing the Chemical Filters

Risk of injury if the wet section cover is unlocked unintentionally or without

paying attention.

Observe the safety instructions for the handling of chemicals (see

instructions

in Chapter 3).

Only replace chemical filters if the machine is off! Risk of electric shock if the

liquid is spilled.

Open the Paper Processor cover until it

Remove the chemical filters and put them in

Pull the used filter cartridges off the holders

and attach a new filter cartridge

(order no. CL+P4-E0364).

Put the chemical filters back in the color-

marked order.

Keep the used filter cartridges safely until

their disposal.

2005-05-01 / PN 04092_01