General Description, Work Routines and Operation
2.5
Switching the Machine On and Off
There are several ways to switch on the Minilab:
automatically via the integrated timer:
–
The machine switches on automatically at the set time (see
Chapter 4) (standard method).
manually via the ON key (if the machine is off and in timer mode)
–
manually via the main breaker (if the machine was switched off via the main breaker)
–
The machine can be switched off:
manually via End of work > Shutdown; the machine is then in timer mode (standard
–
method)
automatically, if no inputs are made within an adjustable time after switching on
–
(included for incorrect timer settings, e.g. startup on holidays; the automatic switch-off
function is disabled as soon as an input is made after switch-on).
manually via the main breaker (exception; only in emergencies or if required for
–
operational reasons; see
in this chapter)
2.5.1
Preparations Prior to Switch-on
Insert loaded paper magazines.
–
– Only applies to d-lab.2/2plus
Insert film carrier and mount the matching mirror box.
Otherwise the machine cannot start up correctly, and an error message may be displayed.
2.5.2
Automatic Switch-On (Timer)
The Minilab starts automatically at certain times if
these staring times have been defined in the timer settings (see
–
in Chapter 4),
the machine has been switched off via End of work > Shutdown (see
–
and Shutdown
in this chapter),
the main breaker has not been switched off.
–
2-18
2005-05-01 / PN 04092_01
Switching the Machine On and OFF with the Main Breaker
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Setting the Timer
in
Setting the Timer
End of work
AgfaPhoto