Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
2.3.2
Scanner
Applies only to d-lab.2/2plus
After making all necessary settings for a the print order the operator inserts the film
through the film feeder into the negative carrier.
dalbr133
While the film is transported through the negative carrier and into the film takeup, the
prescanner determines the exposure data for each negative of the film (prescan).
After the main computer has calculated the correction data, the negatives are digitized:
The film is pulled out of the film takeup and the negatives are positioned one by one in
the negative carrier and exposed. Three color separations per negative are exposed on the
CCD by means of the color filter wheel (mainscan; approx. 2,000 x 3,000 pixels). A fourth
exposure with infrared light is used for the scratch correction.
The processing of slides is similar with the following differences:
Mounted slides are individually inserted via slide carrier, reversal film strips are
–
inserted via the film carrier of the corresponding size negative film (135, 120/220).
The color filters used for slide scanning are different from the negative filters.
–
Slides are automatically detected
– in case of mounted slides when the slide carrier is mounted,
– and in case of reversal film strips when the print mode Slide (see
with slide print mode
In both cases the minilab automatically switches to the slide filters.
Note
The slide carrier for mounted slides and slide filters are available as an option.
AgfaPhoto
in Chapter 6) is selected.
General Description, Work Routines and Operation
1 Lamp
2 Exposure filters
3 Mirror box
Working
2005-05-01 / PN 04092_01
2
4 Film drive
5 Lens
6 CCD area
2-9
Advertisement
Table of Contents
