Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
6.1.9.2 Sepia Prints and Prints with Color Cast
Prints with color cast (e.g. sepia) can only be printed from black&white material.
Produce the color cast by entering a color correction and a saturation > 0 for the image to
be printed. For sepia e.g. enter
Yellow
+3
Red
+4
Saturation:
9
The higher the value for the saturation (range: 1–9), the stronger the color cast
(a setting < 0 results in an image processing error).
Which settings for color and saturation result in a color shade meeting the expectations
of the customer must be determined in tests with various settings.
These settings can be entered
in the Autoprint mode with preview
–
mode with preview (color corrections directly in the print mode screen or after
activating Image editing > Color/Density corrections, saturation after activating
Image editing > Edit).
in a correction configuration which must be linked to the used order configuration or
–
which must be selected via the function Change configuration for the current order
Correction Configurations
(see
Complete Order
in this chapter).
6.1.9.3 Reorder
Applies only to d-lab.2/2plus
Reorders of black&white films and of films without extended DX code can be printed in
the Reorder mode. However, they can also be printed in autoprint mode. General
procedure (for details see
Call up Autoprint.
–
Select the order configuration which has B/W entered as film type.
–
Activate preview.
–
Insert the B/W film.
–
For negatives which have not been ordered press Skip, for ordered negatives change
–
the number of prints is necessary and print.
AgfaPhoto
(Only available on the d-lab.2/2plus)
Changing the Configuration for the
in Chapter 4 or
of Black/White Films / Films Without Extended DX Code
Working in Autoprint Mode
and Slide print
in this chapter):
2005-05-01 / PN 04092_01
Production
6
6-23
Advertisement
Table of Contents
