Service / Repair Routines; Disposal Of The Machine - AgfaPhoto d-lab.2 8060/260 Operation Manual

Table of Contents

Introduction

Service / Repair Routines

Observe the following points before starting service and repair work:

Replace fuses only by the same type of fuse (value, switch-off characteristics).

Please respect the country-specific safety precautions.

Be sure to switch off the machine before starting any service and repair work.

− The machine is equipped with high-voltage carrying and fragile components. For this

reason, the following work must only be performed by authorized service technicians:

− repairs on electrical components,

− maintenance jobs / removal of parts and covers not described in the operation

− Use original AgfaPhoto spare parts: only these parts have been tested for their safety

and usability.

− When replacing electrical components: observe the data given in the circuit and

wiring diagrams.

− At the end of all service / maintenance work: check the general function of the

machine as well as the correct condition of the safety devices.

The machine must be disposed of as industrial waste.

Consumables, chemicals, and spare parts must be disposed of in compliance with the

applying country-specific regulations.

2005-05-01 / PN 04092_01

d-lab.2, d-lab.2plus, netlab.2plus: Operation