Table of Contents
Advertisement
Production
6.10
Saving and Displaying Statistics
Optional accessory:
Statistics Software
The buttons Save statistics in the Pricing menu is only active if the customer bought a
license and the software has been activated (the software is included in the Main
Activating Software
Software; see
Note
Activate the sleep mode if statistics should be checked always on the same weekday at
the end of production. In sleep mode the machine is not switched off entirely when
Shutdown is pressed in the menu End of work; the main computer remains on. It will
then be switched off automatically at the set time (see
Chapter 4).
6.10.1 Displaying Statistics
Note
An order will only be recorded in the statistics when the last print has left the Printer
and entered the Paper Processor.
All paper formats are shown as a rounded figure in full centimeters, with the short side
first.
Example:
152x102
Enter 10x15
102x152
Enter 10x15
So the statistics show two entries with the same name.
008
6-108
2005-05-01 / PN 04092_01
in Chapter 4).
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Setting the Timer
in
Press in this order:
Pricing
Show statistics
The Statistics screen opens.
Applies to d-lab.2/2plus
Press Film mask and select the respective
carrier.
Applies to netlab.2plus
Film mask is fixed: File print.
Press Print mode and select the respective
input:
The first list shows the number of prints
(today / total, including index prints)
listed by print sizes.
The second list shows the number of
prints, index prints, orders, and paper
consumption (today / total).
AgfaPhoto
Advertisement
Table of Contents
