Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Preinstallation
4.4
Room Lighting
The room must be sufficiently illuminated and – if there is no daylight available – a light
source comparable to daylight must be provided to be able to evaluate the color
rendering in the prints.
The use of daylight fluorescent lamps is recommended (400-1,000 Lux).
Direct sunlight must be avoided.
The maximum illumination of 10,000 Lux must not be exceeded.
4.5
Water Connection, Cleaning Sink
Water connection and cleaning sink on the operation site are required for mixing the
chemical solutions and for cleaning routines. We also recommend to provide for a warm
water connection (approx. 30 °C), however, this is not a must.
The Minilab does not need a direct water connection, but this option is an available
accessory (order number see
AgfaPhoto
Ordering Aid / Optional Accessories
).
2005-05-01 / PN 04100_01
Operation Site
9
Advertisement
Table of Contents
