Transport; Operation Site; Separation Of The Food Section; Room Requirements - AgfaPhoto d-lab.2plus Series Service Manual

Digital minilabs
Table of Contents

Advertisement

d-lab.2, d-lab.2plus, netlab.2plus: Preinstallation
3

Transport

Printer and Paper Processor are supplied separately and can be pushed separately to the
installation site. The following prerequisites must be checked and satisfied prior to
delivery:
Doors at least 0.95 m wide and 1.85 m high
4

Operation Site

4.1

Separation of the Food Section

CAUTION!
Food must not be contaminated by photo-chemicals, or the waste or the
emissions thereof (risk of poisoning).
The operation site of the Minilab must be kept separate from the sales and stock
area for foods and snacks, e.g. by a separating wall or facilities having a similar
effect.
4.2

Room Requirements

Room height at least 2.15 m (for removal of racks)
Minimum floor load capacity 500 kg/m²
The floor and the walls should be easy to clean
Floor conditions:
preferably waterproof concrete
resistant to water and photo-chemicals
even (no inclination, uneven spots, etc.)
AgfaPhoto
2005-05-01 / PN 04100_01
Transport
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

D-lab.2 seriesNetlab.2plus series

Table of Contents