Avaya Definity SI Maintenance Manual page 1139

CARD-MEM (Memory Card)
Memory Card Insertion Test (#695)
This nondestructive test verifies whether
A memory card is in the memory card slot of the TN2401/TN794 NetPkt or
TN777BNetcon circuit pack
The system can detect the memory card
Table 10-136. TEST #695 Memory Card Insertion Test
Error
Code
2012
2106
2114
2013
2100
none
555-233-123
Test
Result
ABORT Internal system error
1. Retry the command at 1-minute intervals, up to 5 times.
2. If the problem persists, escalate the problem.
ABORT Could not allocate the necessary system resources to run this
test.
1. Retry the command at 1-minute intervals, up to 5 times.
2. If the problem persists, escalate the problem.
FAIL Memory card is not present or has a bad connection.
1. Verify that the memory card is present or has good
connection.
2. Insert the memory card firmly into slot.
3. Verify the memory card function (test card-mem).
4. If the problem persists, replace the memory card.
5. Verify the memory card function (test card-mem).
6. If the problem still persists, replace the TN2401/TN794
NetPkt or TN777B Netcon circuit pack.
PASS Memory card is present, and the system detects it.
Description/Recommendation
Continued on next page
Issue 4 May 2002 10-353