Avaya Definity SI Maintenance Manual page 1192

Maintenance Object Repair Procedures
Table 10-150. TEST #597 Invalid LAPD Frame Error Counter Test — Continued
Error
Code Result
1-10 FAIL
PASS
Packet Interface Test (#598)
This non-destructive test checks the packet bus interface circuitry on the CLAN
circuit pack. Test failure indicates faulty circuit pack.
Table 10-151. TEST #598 Packet Interface Test
Error
Code Result
2000 ABORT
10-406 Issue 4 May 2002
Test
The circuit pack detects LAPD frame errors. The error code
indicates the value of the on-board error counter.
1. Retry the command at 1-minute intervals, up to 5 times.
2. If the test continues to fail, execute the Packet Interface Test
(#598) (test board UUCSS long).
3. If Packet Interface Test (#598) fails, refer to Packet Bus
repair procedures.
Circuit pack detects no errors.
Test
Did not receive circuit pack test response within the allowable
time period.
1. Retry command at 1-minute intervals, up to 5 times.
2. If the problem persists, reset the circuit pack (reset board
UUCSS).
3. If the problem persists, replace the circuit pack.
Description/Recommendation
Continued on next page
Description/Recommendation
Continued on next page
555-233-123