Avaya Definity SI Maintenance Manual page 734

Maintenance Commands and Trouble-Clearing Aids
Output
The following output example for the test spe-standby command assumes that
the standby SPE is located in carrier B. The responses display on a test-by-test
basis with one line of data for each test result.
test spe-standby
Port Maintenance Name Alt. Name Test No. Result
01B SHDW-CIR
01B SHDW-CIR
01B SPE-SELECT
01B DUPINT
. .
. .
. .
Command Successfully Completed
Field descriptions
Port
Maintenance
Name
Alt. Name
Test No
Result
Error Code
8-484 Issue 4 May 2002
SPE A
TEST RESULTS
285
284
278
315
.
.
.
The port address: cabinet-carrier-slot-circuit
The type of maintenance object that is being tested.
Alternate means of identifying the maintenance object. This
field contains the extension when the object is a data
module.
Test being executed
Test result: Pass, Abort, Fail, No Board, Disabled, Extra Bd.
Numeric code explaining why the release failed or aborted.
Refer to the detailed list of the codes by test number for
each MO.
Error Code
PASS
PASS
PASS
PASS
.
.
.
555-233-123