CARD-MEM (Memory Card)
Table 10-139. TEST #699 Memory Card Directory Recovery Test — Continued
Error
Code
2115
104
105
106
107
110
555-233-123
Test
Result
ABORT
The write-protect switch is set to the "protect" position.
1. Remove the memory card.
2. Move the write-protect switch to the "not-protected"
position.
3. Re-insert the memory card into the slot.
4. Retry the command at 1-minute intervals, up to 5 times.
5. If the problem persists, escalate the problem.
FAIL
Corrupt and irrecoverable directories.
FAIL
Cannot write "0" to the memory card.
FAIL
Cannot erase memory card.
FAIL
Cannot write data into memory card after erasing.
1. Replace the memory card.
2. Retry the command at 1-minute intervals, up to 5 times.
3. If the problem persists, escalate the problem.
FAIL
Cannot write to old memory card (pre-g3v9). Card format is
post-g3v8.
1. Replace with proper card.
PASS
Memory card directory files are sane.
Description/Recommendation
Continued on next page
Issue 4 May 2002
10-359