Avaya Definity SI Maintenance Manual page 1032

Maintenance Object Repair Procedures
Table 10-98. ATM Board Reset (#1256) — Continued
Error
Code Result
1 FAIL
2 FAIL
PASS
0 NO
BOARD
10-246 Issue 4 May 2002
Test
The circuit pack failed to reset
The circuit pack failed to restart.
Retry command.
If the problem persists, replace the ATM-TRK circuit pack.
The ATM-TRK circuit pack is successfully reset.
No board detected.
Check the error log for Error 125 (wrong board) or Error 131 (no
board), and perform the appropriate repair, if needed.
Ensure that the board is properly translated and inserted.
Check for Error 1538 (hyperactivity). If hyperactive, run reset
board UUCSS.
Run the test again. If it fails, replace the ATM-TRK circuit pack,
and retest.
Description/Recommendation
Continued on next page
555-233-123