Avaya Definity SI Maintenance Manual page 847

ANL-24-L (24-Port Analog Line)
Table 10-23. TEST #161 Looparound Test — Continued
Error
Code
1004
1005
1018
2000
2100
555-233-123
Test
Result
ABORT The port was seized by a valid call during the test. The test
has been aborted.
1. Use the display port PCSSpp command to determine the
station extension.
2. Use the status station command to determine the
service state of the port.
3. If the port is in use, wait until the port is idle and retry the
command at 1-minute intervals a maximum of 5 times.
ABORT This test is not run on ports administered as External Alert,
Announcement or combined modem pool ports. This error can
be ignored.
ABORT The test has been disabled by administration. The default for
the Test field on the station form is y. Determine why this
field has been set to
ringing application test 48, that can be customer or terminal
disturbing).
1. To enable the test for a particular station being tested,
enter change station extension and set the
on the station from
ABORT Response to the test request was not received within the
allowable time period.
ABORT Could not allocate the necessary system resources to run this
test. This could be due to a failure to seize the port.
1. Retry the command at 1-minute intervals a maximum of 5
times.
Description/Recommendation
n on this station (this may be due to the
to y.
n
Continued on next page
Issue 4 May 2002
Test? field
10-61