Avaya Definity SI Maintenance Manual page 1295

DAT-LINE (Data Line)
Table 10-186. TEST #6 NPE Crosstalk Test — Continued
Error
Code
1004
1020
2000
2100
Any
555-233-123
Test
Result
ABORT The port has been seized by a user for a valid call. Use status
data-module to determine when the port is available for
testing.
1. Retry the command at 1-minute intervals a maximum of 5
times.
ABORT The test did not run due to an already existing error on this port
(Error Type 769).
1. Refer to the procedure for Error Type 769. If Error Type
769 still occurs on this port, replace the circuit pack.
ABORT Response to the test request was not received within the
allowable time period.
ABORT Could not allocate the necessary system resources to run this
test.
1. Retry the command at 1-minute intervals a maximum of 5
times.
FAIL The NPE of the tested port was found to be transmitting in
error. This causes noisy and unreliable connections.
1. Replace the circuit pack.
PASS The port is correctly using its allocated time slots.
User-reported troubles on this port should be investigated
using other port tests, examining the ADU, external wiring, and
customer equipment.
Description/Recommendation
Continued on next page
Issue 4 May 2002 10-509