Avaya Definity SI Maintenance Manual page 1187

CLAN-BD (Control LAN Circuit Pack)
Control Channel Loop-Around Test (#52)
This non-destructive test fails if the circuit pack does not return to a sane state
after being reset. This test queries the circuit pack for its code and vintage, and
verifies its records.
Table 10-146. TEST #52 Control Channel Loop-Around Test
Error
Code Result
None ABORT
2100
FAIL
PASS
555-233-123
Test
Could not allocate the necessary system resources to run test.
1. Retry the command at 1-minute intervals, up to 5 times.
2. If the problem persists, escalate the problem.
The circuit pack failed to return the code or vintage.
1. Retry command at 1-minute intervals, up to 5 times.
2. Reset the board (reset board UUCSS).
3. If reset aborts with error code 1115, busyout (busyout
board UUCSS), reset (reset board UUCSS), and release
board (release board UUCSS).
4. If test continues to fail, replace the circuit pack.
5. Escalate the problem if failures continue.
Test successful.
Description/Recommendation
Issue 4 May 2002 10-401