Avaya Definity SI Maintenance Manual page 668

Maintenance Commands and Trouble-Clearing Aids
Action/
Object Qualifier Qualifier Description
test full Executes the most comprehensive test call
analog- available using the administered test set type.
testcall
Executes a supervision-only test call (approx. 10
no super- sec.) and confirms the presence of the test set at
vision the far end.
Executes the "full" test (skips any self-test
no- sequences), saving about 20 seconds on the
selftest type 105 transmission test and has no effect on
type 100 or 102 transmission tests.
no-return- Executes the "full" test (skips any return loss
loss sequences), saving about 20 seconds on the
type 105 transmission test and does not have
any effect on type 100 or 102 transmission tests.
Executes the "full" test (skips all self test and
no-st-or-rl return loss sequences), saving about 40
seconds on the type 105 transmission test and
does not have any effect on type 100 or 102
transmission tests.
repeat How many times each test in the sequence is
number repeated (1-100)
schedule
Command is validated and then a scheduling
form displays to schedule execution of the
command. The command is then placed in the
command queue and is executed at the
specified time. The information displayed by the
command is sent to the system printer instead of
the screen.
Examples:
test analog-testcall trunk 78 f
test analog-testcall trunk 78 f schedule
test analog-testcall trunk 80/1 s r 2
test analog-testcall trunk 80/1 s r 2 schedule
test analog-testcall trunk 78/2 no-selftest r 10
test analog-testcall trunk 78/2 no-selftest r 10
schedule
test analog-testcall trunk 78 r 4
test analog-testcall trunk 78 r 4 schedule
test analog-testcall port 2a1505 no-st-or-rl r 4
test analog-testcall port 2a1505 no-st-or-rl r 4
schedule
test analog-testcall board 2a15
test analog-testcall board 2a15 schedule
test analog-testcall port 2a1505
no-return-loss
test analog-testcall port 2a1505
no-return-loss schedule
te an t 80
te an t 80 schedule
1 Refer to the Report Scheduler and System Printer feature specification for more details.
8-418 Issue 4 May 2002
1
Feature
Inter-
Logins Default actions
init Test See
inads sequence below
craft = long;
cust repeat = 1
555-233-123