Avaya Definity SI Maintenance Manual page 943

ANN-PT (Announcement Port)
4. Either the announcement data module is busy or all the administered
NETCON data modules are busy.
5. There is no tape in the system.
6. The tape in the system does not have a valid announcement file saved
on it.
NOTE:
Unlike translations, there is no provision in the system for automatically
saving announcements to the system tape.
Hardware Error Log Entries and Test to Clear
Values
Table 10-51. Announcement Port Error Log Entries
Error Aux
Type Data
1
0 0 Any
1 Playback Speech
Memory Array (PSMA)
Test (#206)
18 0 The port was busied out
130 (a) None
257 Channel Administration
Memory Array (CAMA)
Test (#205)
17667 In-line error
513 140AY Channel Sanity
Inquiry Test (#222)
17684 In-line error
769 (b) None
1 Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the
appropriate test description and follow the recommended procedures.
Notes:
a. This error type indicates that the circuit pack has been removed or has
been insane for more than 11 minutes. To clear the error, reinsert or
replace the circuit pack.
555-233-123
Associated Test
Any
MINOR
WARNING
WARNING
MINOR
MINOR
Alarm On/Off
Level Board
Any test port PCSSpp sh r 1
ON test port PCSSpp sh r 3
OFF release port PCSSpp
ON test port PCSSpp sh
ON test port PCSSpp l r 3
ON test port PCSSpp sh r 3
Issue 4 May 2002
Test to Clear Value
10-157