Avaya Definity SI Maintenance Manual page 1143

CARD-MEM (Memory Card)
Table 10-138. TEST #697 Memory Card Match Test — Continued
Error
Code
2110
2111
101
102
103
116
118
132
134
148
150
555-233-123
Test
Result
ABORT Memory card is not present.
ABORT Switch does not recognize the memory card.
1. Insert a formatted memory card into the slot at the
TN2401/TN794 NetPkt or TN777B Netcon circuit pack.
2. Retry the command at 1-minute intervals, up to 5 times.
3. If the problem persists, escalate the problem.
FAIL Memory card is a system-upgrade memory card.
FAIL Memory card does not contain an Announcements file (for
systems configured with the Announcement feature).
FAIL Memory card is a system-upgrade memory card, and uses
announcement feature without available announcement file.
FAIL Memory card capacity does not match system configuration
capacity.
FAIL
Memory card uses announcement feature without available
announcement file, and memory card does not match system
FAIL
configuration.
FAIL
System translation reaches 98% of capacity.
Memory card uses announcement feature without
FAIL
announcement file in memory card, and system translation
reaches a 98% capacity.
FAIL
Memory card capacity does not match the system
configuration, and system translation reaches 98% capacity.
Memory card uses announcement feature without
announcement file in memory card, memory card capacity
does not match the system configuration, and system
translation reaches 98% capacity.
1. Replace the memory card with a 10 MB memory card.
2. Retry the command at 1-minute intervals, up to 5 times.
3. If the problem persists, escalate the problem.
PASS Memory card matches the system configuration, and has
enough space for saving translations and announcements (if
applicable).
Description/Recommendation
Continued on next page
Issue 4 May 2002 10-357