Avaya Definity SI Maintenance Manual page 1185

CLAN-BD (Control LAN Circuit Pack)
1. Busyout (busyout board UUCSS) and release (release board
2. Allow 30 minutes for condition to clear itself.
3. To re-establish circuit pack into service manually, busyout (busyout
4. If error recurs within 15 minutes, replace the circuit pack.
5. If the same error occurs on a different circuit pack, follow normal
r. Error Type 3840: Circuit pack received bad control channel message from
switch.
Aux Data:
4096
4097
4098
4099
4100
4101
4102
s. Error Type 3841-3843: errors do not affect service.
Below, Error Types correspond to descriptions.
3841
3843
These errors do not affect service, however, they may cause reports of
other errors that do affect service.
If Error Type 3843 begins to affect service, it escalates to Error Type 1294.
t. Error Type 3842: Packet interface receive buffers overflowed.
If this error occurs frequently, the overflow may be congesting the circuit
pack.
1. Refer to Receive FIFO Overflow Error Counter Test (#596).
u. Error Type 3844: LAPD frame contains LAPD Protocol Error.
By themselves, these errors do not affect service.
v. Error Type 3845: Angel inter processor error.
By themselves, these errors do not affect service.
555-233-123
UUCSS) circuit pack
board UUCSS), reset (reset board UUCSS), and release (release
board UUCSS) the circuit pack.
escalation procedures.
Bad major heading
Bad port number
Bad data
Bad sub-qualifier
State inconsistency
Bad logical link
Bad application identifier
Internal firmware error.
Bad translation RAM. Call uses another translation location.
Issue 4 May 2002 10-399