Avaya Definity SI Maintenance Manual page 683

test duplication-interface
Output
The following example shows the output from the test duplication-interface 1A
command, where A is the active carrier in an SPE duplex system. The responses
display on a test-by-test basis with one line of data for each test result.
test duplication-interface a long
Port Maintenance Name
1A SHDW-CIR
1A SHDW-CIR
1A SHDW-CIR
1A SPE-SELE
1A DUPINT
1A DUPINT
1A DUPINT
1A DUPINT
1A DUPINT
1A DUPINT
1A DUPINT
1A DUPINT
1A DUPINT
Command Successfully Completed
Field Definitions
Port
Maintenance
Name
Alt. Name
Test No.
Result
Error Code
555-233-123
TEST RESULTS
Alt. Name Test No. Result
285
283
284
278
315
275
276
280
271
277
272
274
273
The port address (cabinet-carrier); always 01A or 01B
SHDW-CIR, SPE-SELE, or DUPINT.
Not applicable
The test being executed
Test result: Pass, Abort, Fail, No Board, or Disabled
Numeric code explaining why the release failed or aborted. Refer
to the detailed list of codes by test number for each MO.
SPE A
Error Code
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
Issue 4 May 2002 8-433