Avaya Definity SI Maintenance Manual page 1082

Maintenance Object Repair Procedures
Table 10-118. BRI-SET/ASAI-ADJ Error Log Entries — Continued
Error Aux Associated
Type Data
3584 0, 1 None
3585- 0 None
3839(i)
3840- 0 None
4095
(m) (n)
1 Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the
appropriate test description and follow the recommended procedures.
2 Major alarms on this MO may be downgraded to Warning alarms based on the value used in the set
options command.
Notes:
a. Errors of this type indicate violations of the ISDN-BRI signaling protocol;
timers associated with certain Layer 3 messages have expired before a
required response was received. In the following table, the aux data field
indicates which timer has just expired. (For more information, refer to the
Avaya ISDN-BRI Specification.)
Aux Data
The switch sent a message to the endpoint which did not respond in the
allotted time. This can happen occasionally due to failure of the
point-to-point signaling link or because of a problem in the BRI endpoint or
10-296 Issue 4 May 2002
Alarm
Level
Test BRI-PORT
2 First T303 (SETUP timer)
3 Second T303 (SETUP timer)
4 T305 (DISConnect timer)
5 First T308 (RELease timer)
6 Second T308 (RELease timer)
10 T316 (RESTart timer)
12 T309 (Layer 2 Failure timer)
16 TM100 (Management Information Message timer 1)
17 TM200 (Management Information Message timer 2)
102 TASAI (ASAI Routing Timer)
Alarm Level
ABRI-PORT
ATT-PORT On/
LGATE-PORT Off
ATTE-PT Board
Continued on next page
Timer Type
Test to Clear Value
555-233-123