Adm-Conn (Administered Connection) - Avaya Definity SI Maintenance Manual

ADM-CONN (Administered Connection)

ADM-CONN (Administered
Connection)
MO Name (in
Alarm Log)
ADM-CONN MAJOR
ADM-CONN MINOR
ADM-CONN WARNING
1 Where N is an appropriate Administered Connection number determined via the PORT field from
the Alarm or Error Log.
An Administered Connection provides an end-to-end connection between two
access endpoints or data modules. This connection is automatically established
when the administered connection is administered and is due to be active. An
error is logged when an administered connection cannot be established or when
an established administered connection fails. An alarm is logged when a
connection cannot initially be established or fails and cannot be reestablished. An
alarming strategy is supported on a per administered connection basis. An alarm
is raised for a connection when either the number of consecutive failed attempts
to establish the connection reaches the alarm threshold or it can be determined
that a failed attempt to establish was due to an administered error. The alarm
raised (major, minor, warning, or none) is specified in the Alarm Type field of the
Administered Connection Administration Form.
Error Log Entries and Test to Clear Values
Table 10-6. Administered Connection Error Log Entries
Error Type
0 (a)(b)(c)(k)
1 (a)(b)(c)(d)(e)
2 (a)(b)(c)(f)
6 (a)(b)(c)(g)
16 (a)(b)(c)(k)
17 (a)(c)(h)
18 (a)(b)(c)(i)
21 (a)(b)(c)(g)
555-233-123
Alarm
Level Initial Command to Run
status administered-connection N
status administered-connection N
status administered-connection N
Aux Associated
Data Test
Any None
Any None
Any None
Any None
Any None
Any None
Any None
Any None
1
Full Name of MO
Administered Connection
Administered Connection
Administered Connection
Alarm On/Off
Level Board
Any OFF
Any OFF
Any OFF
Any OFF
Any OFF
Any OFF
Any OFF
Any OFF
Continued on next page
Issue 4 May 2002
Test to Clear
Value
None
None
None
None
None
None
None
None
10-11