Table of Contents
Advertisement
Activate error
compensation
Example
6 – 42
The appropriate machine parameter must be set for nonlinear axis error
compensation, and the compensation value table must be registered in a
configuration file:
7 7 7 7
With MP730, activate for each axis the nonlinear axis error compensation.
7 7 7 7
To create a configuration file: Press the MOD key and enter the code
number 807667; with the program manager, create a configuration file with
a .CMA extension.
7 7 7 7
Use soft keys (e.g. 1 OFF/ON) to activate columns for the axes for which you
have created compensation value tables.
7 7 7 7
Enter the compensation value table: You can assign more than one
compensation value table to each axis, however, only one table can be
active. Enter the file names of the compensation value tables in the
respective lines. You can select the active line either with the soft key SET
ACTIV LINE or with Module 9095. With Module 9035 you can interrogate
the active line.
7 7 7 7
Enter the complete name of the configuration file with the .CMA extension
in the system file OEM.SYS with the command TABCMA=.
Entry in the configuration file for axes 2 = Y and 3 = Z:
Compensation-value table valid for 20° = AXIS-Y.COM and AXIS -Z.COM
Compensation-value table valid for 35° = AXIS -YT.COM and AXIS -ZT.COM
HEIDENHAIN Technical Manual TNC 426, TNC 430
Advertisement
Table of Contents
