6.13.6 Powering Up and Shutting Down the Control
Powering up the
control
6 – 248
While the control is starting, a customer-specific company logo can be
displayed instead of the HEIDENHAIN logo.
Note
Your logo must exist in 16-color bitmap format. The logo's width in pixels
must be divisible by eight.
7 7 7 7
Convert the logo with the HEIDENHAIN conversion tool "Bmp2Logo" from
.BMP format to .VEC format. The tool also creates a *.SYS file.
7 7 7 7
The two files must be given the names LOGO.SYS and LOGO.VEC.
7 7 7 7
On the TNC, create a new directory named PLC:\LOGO.
7 7 7 7
Move LOGO.VEC to the PLC:\LOGO directory.
7 7 7 7
Move LOGO.SYS to the main directory PLC:\.
HEIDENHAIN Technical Manual TNC 426, TNC 430