Overview Of Modules - HEIDENHAIN TNC 426 PB/M Technical Manual

5 Modules, Markers and Words

5.1 Overview of Modules

December 2001
Module Function
9000/ Copy in the marker or word range
9001
9002 Reading all inputs of a PLC input/output
unit
9003 Reading in analog inputs
9004 Edges of PLC inputs
9005 Update all outputs of a PLC input/output
unit
9007 Diagnostic information of the PL
9008 Reading specific inputs of a PLC input/
output unit
9009 Update certain outputs of a PLC input/
output unit
9010/ Read in the word range
9011/
9012
9019 Size of the processing stack
9020/ Write in the word range
9021/
9022
9031 Overwrite machine parameters
9032 Read machine parameters
9033 Select machine parameter file
9034 Load a machine parameter subfile
9035 Reading status information
9036 Writing status information
9038 Reading general axis information
9040 Reading of axis coordinates
(Format 0.001 mm)
9041 Reading of axis coordinates
(Format 0.0001 mm)
9042 Reading the spindle coordinates
(Format 0.001°)
Overview of Modules
SW Vers. Page
7 – 177
6 – 390
6 – 393
6 – 392
6 – 391
280 476-05 6 – 389
280 472-07 6 – 391
280 472-07 6 – 392
7 – 178
7 – 47
7 – 179
4 – 8
4 – 9,
7 – 37
4 – 11
4 – 12
6 – 22,
6 – 43,
6 – 242
6 – 382,
6 – 396
6 – 20
6 – 233
6 – 233
6 – 182
5 – 3