Load Word (Lw); Load Double Word (Ld) - HEIDENHAIN TNC 426 PB/M Technical Manual

7.7.7 LOAD WORD (LW)

7.7.8 LOAD DOUBLE WORD (LD)

7 – 92
Syntax: LW (LOAD WORD)
Operands: M, I, O, T, C
Action:
Copy 16 markers, inputs, outputs, timer or counters with ascending
numbering into the word accumulator. Each operand occupies one bit in the
accumulator. The TNC saves the entered operand address in the accumulator
as LSB, the entered address +1 as LSB +1 etc. The last (16th) operand is now
the MSB! If necessary, the TNC supplements the accumulator with the
correct algebraic sign.
Example:
See example command LB. Use command LW in the same way as LB.
However, the TNC processes 16 operands.
Syntax: LD (LOAD DOUBLE WORD)
Operands: M, I, O, T, C
Action:
Copy 32 markers, inputs, outputs, timer or counters with ascending
numbering into the word accumulator. Each operand occupies one bit in the
accumulator. The TNC saves the entered operand address in the accumulator
as LSB, the entered address +1 as LSB +1 etc. The last (32nd) operand is now
the MSB! If necessary, the TNC supplements the accumulator with the
correct algebraic sign.
Example:
See example command LB. Use command LD in the same way as LB.
However, the TNC processes 32 operands.
HEIDENHAIN Technical Manual TNC 426, TNC 430