Table of Contents
Advertisement
6.13.23 User Parameters
December 2001
You can provide the machine tool operator with easy access to up to 16
machine parameters known as user parameters. He can then call them
through the MOD function by simply pressing the USER PARAMETER soft
key.
7 7 7 7
In MP7330.x, enter the numbers of the machine parameters that you wish
to make available.
Example:
If MP7230.1 should be the first available user parameter:
7 7 7 7
Enter the input value 7230.01 in MP7330.0.
If the user selects a user parameter, a message appears on the screen. You
can specify this message:
7 7 7 7
In the system file OEM.SYS, enter the name of the PLC dialog message file
with the command PLCDIALOG=.
7 7 7 7
In MP7340.x enter the line number of the PLC dialog message to be
displayed.
MP7330.0-15 Specifying the user parameters 1 to 16
Input:
0 to 9999.00 (no. of the user parameter)
MP7340.0-15 Dialog messages for user parameters 1 to 16
Input:
0 to 4095 (line number of the PLC dialog message file)
Display and Operation
6 – 323
Advertisement
Table of Contents
