Code Numbers; Programming Station - HEIDENHAIN TNC 426 PB/M Technical Manual

6.13.24 Code Numbers

6.13.25 Programming Station

6 – 324
You can enter certain code numbers in the MOD function. With these code
numbers you can activate certain functions.
The following code numbers have a fixed meaning:
Code number Function
95148 Select the machine parameter list
807667 Select the PLC mode
857282 Reset the operating times
75368 Automatic offset adjustment
123 Call machine parameters that are accessible to the user
531210 Delete M0 to M999 and B0 to B127
688379 Oscilloscope
555343 FN17: Overwrite system data
FN25: Overwrite datum
NET123 Ethernet settings (option)
LOGBOOK Read out the log
FAILTEST Simulate an internal EMERGENCY STOP
The code of the entered code number is entered in the double word D276. You
can evaluate this code and define your own functions for code numbers, or
disable fixed code numbers.
D276 Code of the code number last entered
via MOD
With MP7210 you can set the control for use as a programming station
without a machine.
In this setting, the PROGRAMMING AND EDITING and TEST RUN modes are
operable.
You can select whether the PLC should be active.
MP7210 Programming station
Input: 0: Controlling and programming
1: Programming station with PLC active
2: Programming station with PLC inactive
HEIDENHAIN Technical Manual TNC 426, TNC 430
Set Reset
NC NC