Table of Contents
Advertisement
PLC positioning
through markers
and words
December 2001
To ensure compatibility, a PLC positioning command is permissible for axes
1 to 9 with M4120 to M4128, D528 to D544 and W560 to W568. Software
limit switches are ignored!
Programming:
7 7 7 7
Enter the target position in the double words D528 to D544 in the unit
[0.0001 mm].
7 7 7 7
Enter the feed rate in words W560 to W568 [mm/min].
7 7 7 7
To start the PLC positioning movement: Set markers M4120 to M4124 for
the desired axis.
D528-544
Target position for PLC positioning
W560-568
Feed rate for PLC positioning
M4120
PLC positioning axis 1 active
M4121
PLC positioning axis 2 active
M4122
PLC positioning axis 3 active
M4123
PLC positioning axis 4 active
M4124
PLC positioning axis 5 active
M4125
PLC positioning axis 6 active
M4126
PLC positioning axis 7 active
M4127
PLC positioning axis 8 active
M4128
PLC positioning axis 9 active
PLC Positioning
Set
Reset
PLC
PLC
PLC
PLC
NC/PLC NC/PLC
NC/PLC NC/PLC
NC/PLC NC/PLC
NC/PLC NC/PLC
NC/PLC NC/PLC
NC/PLC NC/PLC
NC/PLC NC/PLC
NC/PLC NC/PLC
NC/PLC NC/PLC
6 – 35
Advertisement
Table of Contents
