Table of Contents
Advertisement
MP
Function and input
MP7290.0-8
Position display step for axes 1 to 9
Input:
MP7291
Display of axes on the screen
Format:
Input:
MP7291.0
Display in traverse range 1
MP7291.1
Display in traverse range 2
MP7291.2
Display in traverse range 3
MP7295
Disabling "datum setting"
Format:
Input:
MP7296
"Datum setting" through axis keys
Input:
MP7300
Erasing the status display and Q parameters
Input:
December 2001
0: 0.1 mm or 0.1°
1: 0.05 mm or 0.05°
2: 0.01 mm or 0.01°
3: 0.005 mm or 0.005°
4: 0.001 mm or 0.001°
5: 0.0005 mm or 0.0005°
6: 0.0001 mm or 0.0001°
SXYZABCUVWxyzabcuvw-
Characters 1 to 9 from the right represent
lines 1 to 9
Character 10 is the spindle "S", which is always
output in line 9.
%xxxxxxxxx
Bits 0 to 8 correspond to axes 1 to 9
0: Not disabled
1: Disabled
0: Datum can be set by axis keys and
by soft keys
1: Datum can be set only by soft key
0: Status display, Q parameters and
tool data are deleted when the program
is selected.
1: Status display, Q parameters and
tool data are deleted with M02, M30,
END PGM, or when a program is selected.
2: Erase the status display and tool data
when a program is selected.
3: Erase the status display and tool data
when a program is selected or with M02,
M30, or END PGM.
4: Status display and Q parameters are deleted
when a program is selected.
5: Status display and Q parameters are deleted
when a program is selected or with M02,
M30, or END PGM.
6: Erase the status display when a program
is selected, or with M02, M30, or END PGM.
7: Erase the status display when a program
is selected, or with M02, M30, or END PGM.
List of Machine Parameters
Software
Page
version and
behavior
PLC, CN123
6 – 231
RUN
PLC
6 – 5
RUN
PLC, CN123
6 – 224
RUN
PLC, CN123
6 – 224
RUN
PLC, CN123
6 – 241
RUN
4 – 53
Advertisement
Table of Contents
