NC software
280 474-04 (export
version 280 475-04)
2 – 54
Release: 05/98
Improvements:
n
MP860: Define axis as torque-master-slave axis
n
MP2900: Torque bias of the torque-master-slave control
n
MP2910: Gain in the torque-master-slave control
n
MP2920: Torque distribution of the torque-master-slave control
n
MP2930: Speed rating factor of the torque-master-slave control
n
MP7160 bit 1: Limiting the spindle speed during rigid tapping
n
MP7263 bit 0: Display POCKET TABLE soft key
n
MP7440 bit 6: Activating M134
n
MP7441 bit 0: Suppress error message when machining cycle is called
without M3 or M4
n
MP7683 bit 4: Edit pallet table
n
Indication of position of machining plane expanded
n
FN17 ID50: Overwrite data in tool table
n
Module 9092, 9093: Element numbers for tool number and index
n
Module 9147: Assign new Ref value
n
Module 9155: Switch axis from controlled/uncontrolled state
n
Module 9156: Switch axis from uncontrolled/controlled state
n
Module 9220: Traversing the reference marks in each operating mode and
with PLC axes
n
Module 9225: Compensation value for zero pulse
n
Master-slave torque control
n
ISO: With G36 (spindle orientation) it is possible to program a Q parameter
as an angular value.
n
ISO: In cycle G80, a feed rate and a safety clearance can be programmed as
an option.
n
Cycle 202, 204: Input parameters for angle in oriented spindle stop
n
Several pocket tables possible
n
M104 reactivates the manually set datum of all axes
n
The ID number of the DSP software is shown in the system info
n
Automatic tool compensation and monitoring of the breakage tolerance in
the touch-probe cycles 421 to 426
n
With the soft key EDIT PALLET, the current pallet table can be edited in
pallet operation.
n
Face milling: With M128 in connection with LN blocks, the tool is held
perpendicular to the contour.
n
Peripheral milling: With M128 in connection with RR/RL, the negative radius
oversize (DR) is compensated perpendicular to the machining and tool
direction.
HEIDENHAIN Technical Manual TNC 426, TNC 430